Information On Physical And Mechanical Characteristics; Application Of Dags; Installation Instructions; Correct Positioning - Cascade DAGS Manual Del Usuario

Information on physical and mechanical
characteristics
!

Installation Instructions

Rubber Layer
Magnetic Layer
20-30 mm
20-30 mm
OK
DAGS
3
Rubber Hardness SHORE A
Length of one DAGS mm
Width of one DAGS mm
Thickness of one DAGS mm
Weight of one DAGS mm
Magnetic Field generated by one DAGS on contact max. mT
Maximum operating temperature

Application of DAGS

Wear suitable protective gloves
necklaces, bracelets, etc., because they will be attracted to
the magnetic field generated by the magnets on the bottom
side of the DAGS.
The minimum width of forks suitable for DAGS application is 10
cm.
The DAGS should not extend beyond the edge of the fork.
Make sure the fork surfaces are clean, dry and free of foreign
objects.
Open the package and separate the devices from one another.
While positioning the DAGS, keep fingers free of the space
between the fork surface and the DAGS, DUE TO RISK OF
CRUSHING BETWEEN THE SURFACES.
Fork
Identify the magnetized side and turn it facing downwards, po-
sitioning the point of the DAGS about 2-3 cm from the pointed
end of the metal fork.
After the DAGS has adhered, test the grip and ensure that the
device follows the outline of the fork precisely without protrud-
ing past the edges.
Dispose of all packaging materials as indicated by current
regulations.
Fork Tips
Fork
Fork Tips
and do not wear metal-based
20-30 mm
DAGS
OK
DAGS
70 +/- 2 shore A
1400-1550-2000-2500 mm
80-98-118-148 mm
6, 6-9 mm
2,80 to 9,30 kg
max. mT 19,25
70/80 °C

Correct Positioning

Fork Tips
Fork Tips
6827709 EN
DAGS
DAGS
FK0151.eps