Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RECORDING FROM THE RADIO
1. Tune to desired radio program as described in the "Radio Operation" section.
2. Insert a blank cassette tape into the Cassette Compartment.
3. Press the Record Button and the Play Button simultaneously to start recording. With the built-in Automatic
Level Control (ALC), the best recording quality is automatically adjusted. Changing the volume level will not
affect the recording.
4. To stop recording temporarily, press the Pause Button. To continue the recording, press the Pause Button
once again.
5. Press the Stop Button to stop recording.
6. When the tape runs to its end, the cassette operation will be stopped automatically.
CD/MP3 OPERATION
Playing a Compact Disc
1. Set the Function Switch to CD/MP3 position. Open the CD compartment by pushing the CD door open button.
2. Put a CD into the compartment and close the CD door.
3. The unit will start reading the disc and the total number of tracks in the entire disc will display.
4. If Play/Pause Button is pressed during stop mode, the first track will be played.
5. If Play/Pause Button is pressed during play mode, the CD will go to pause mode and pause signal will be
shown on.
6. If Stop Button is pressed during play or pause mode, the CD will go to stop mode and display total no. of track.
Playing a MP3
1. Insert a MP3 disc into the CD compartment and close the door.
2. The unit will start reading the disc and the total number of tracks in the entire disc will display.
3. If Play/Pause Button is pressed during stop mode, the first track will be played.
4. Press Folder UP Button to select the album you want to listen.
5. To stop play, press the Stop Button
Skip Mode
1. During play or pause mode, if Skip up
Button is pressed, it will go to next track and display the track no.
and then continue play or pause mode.
2. During play or pause mode, if Skip down
same track no. is display and CD continue the play or pause mode.
3. After step 2, press Skip down
Button again, it will go to the previous track and continue the play or pause
mode.
Different Play Mode
Mode Button can be pressed during play to accomplish many different kinds of play.
Pagina 4
Button is pressed, it will go back to the beginning of the track,
Programming (operates by remote control only)
In case of CD Disc
1. Set in CD/MP3 mode. (Please ensure unit in CD stop mode)
2. Press the Program Button on the remote, display will flash.
3. Select a desired track by using the Skip Buttons.
4. Press the Program Button to enter the track into setting.
5. LCD display changes to 02.
6. Repeat step 3-4, up to 20 tracks can be programmed in any order.
7. Press Play Button once to start playing the first track of your programmed list.
8. Press Stop Button once to cancel the programming.
In case of MP3 Disc
All procedure is same as normal disc. But if you have directory in your disc, you have to select directory and track
both. You can program up to 20 songs with above method.
RECORDING FROM CD/MP3 PLAYER
1. Slide the Function Switch to "CD/MP3" position.
2. Put a CD or MP3 disc into the CD compartment with the label on top.
3. Insert a blank cassette into the Cassette compartment and press Pause Button of the cassette deck.
4. Press Record Button and Play Button simultaneously of recording stand-by. With the built-in ALC, the best
recording quality is adjusted.
5. Activate the CD player, playing in a desired track as described in the CD Player Operation section. Release
the Pause Button of the cassette deck to start recording.
6. To temporary stop recording, press the Pause Button. To continue recording, press the Pause Button again.
7. Press Stop Button of the cassette deck to stop recording, then stop CD playback by pressing CD Stop Button
of the CD player.
REMOTE CONTROL
Open the Battery Compartment Door and insert two pieces "AA" size batteries into the battery compartment with
battery polarity as shown inside the battery compartment.
Point the remote control at the remote sensor. The functions of the buttons on the remote control are same as the
corresponding controls on the main unit.
1.
Stop Button
2.
Program Button
3.
Mode Button
4.
Folder Up Button
5.
Folder Down Button
6.
Play / Pause Button
7.
Skip Up Button
8.
Skip Down Button
9.
Battery Compartment
Warning:
When the remote will not be used for a long time, remove the batteries in order to prevent damage due to
electrolyte leakage.
Pagina 5
Tabla de contenido
