Tabla de contenido
Idiomas disponibles
Idiomas disponibles
LOCATION OF CONTROLS
1.
Volume control knob
2.
CD door open button
3.
Carry handle
4.
FM antenna
5.
Cassette stop button
6.
Cassette play button
7.
Cassette F.F. button
8.
Cassette rewind button
9.
Cassette record button
10.
Cassette eject button
11.
CD door
12.
CD play/pause button
13.
CD mode button
14.
CD stop button
15.
Dial pointer
16.
Tuning knob
Pagina 2
17.
speaker
18.
CD folder up button
19.
CD skip up button
20.
CD skip down button
21.
Power indicator
22.
LCD display
23.
Cassette compartment
24.
Function switch
25.
FM stereo indicator
26.
Band switch
27.
Stereo headphone jack
28.
Battery door
29.
AC socket
30.
AUX/MP3-in jack
31.
Voltage selector
32.
Remote sensor
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. When planning not to use this unit for a long time, disconnect the power cable from the wall outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid shock risks
caused by damaged cable.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert 6 pieces UM-2 "C" size
batteries into the battery compartment with battery polarity as shown inside the battery compartment.
RADIO OPERATION
1. Set the function switch to RADIO position.
2. Set the Band Switch to the "AM" or "FM" position.
3. Turn the Tuning Knob to your desired radio station.
4. Adjust the sound level by rotating the Volume Control Knob.
FM STEREO INDICATOR
When turn to a FM stereo broadcast the "FM ST." LED Indicator will light up.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a
built-in antenna, turn the whole unit for best reception.
CASSETTE OPERATION
Tape Playback
1.
Press the Eject Button to open the cassette door, insert a cassette tape into the Cassette Compartment and
push the cassette door to close.
2.
Slide the Function Switch to Tape position and press the Play Button to start playing the tape.
3.
Adjust the Volume Control Knob to your desired volume level.
4.
To stop the tape, simply press the Stop Button.
Fast Forward and Rewind
The tape can be fast forward or rewind by pressing the Fast Forward Button or Rewind Button respectively.
Auto Stop System
When the tape runs to its end during playback or recording, the cassette operation will be stopped automatically.
CAUTION: To avoid damage to the cassette mechanism or to the cassette tape, always press the Stop Button
between each operation
Pagina 3
Tabla de contenido
