Idiomas disponibles
Idiomas disponibles
WARNING
Like any moving product, scooters can be dangerous if due care and attention is not paid. Be sure to read the manual before going on
your scooter. In particular pay attention to the following:
1. Read the instructions carefully before using the scooter.
2. User's maximum weight: 20kg.
3. Always wear safety equipment such as a helmet, knee pads and elbow pads.
4. Always wear a helmet when riding your scooter and keep chinstrap securely buckled.
5. Always wear closed toe shoes when riding.
6. Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking and visibility.
7. Avoid sharp bumps, drainage grates and sudden surface changes. Scooter may suddenly stop.
8. Check the limitation of use according to regulations of road safety. Obey all local traffic and scooter riding laws and regulations.
9. Ride on smooth, paved surfaces away from motor vehicles.
10. Not to be used on public highways or in traffic.
11. Do not use the scooter at night or in periods with reduced visibility.
12. Watch out for pedestrians.
13. Avoid excessive speed associated with downhill rides.
14. Before every use, please make sure that the scooter and all joints have been assembled tightly, as with use, joints may wear out.
15. Before using the scooter, please check that the screws are tightened securely.
16. Do not modify the product other than manufacturer's instructions. No modification that may reduce the scooter's safety is allowed.
17. Brake will get hot from continuous use. Do not touch after braking.
18. Periodically check hardware and tighten if necessary. Replace worn or broken parts immediately.
19. Skill is required to avoid falls or collision causing injury to the user and third parties.
20. The scooter is intended to be used by only one child with weighting up to 20 kg. It is not recommended for children under 3 years old.
21. Do not perform stunts.
22. This product complies with European standard EN 71. The materials used for making this product are suitable and safe for children' s
health.
IMPORTANT NOTICE TO PARENTS :
THIS MANUAL CONTAINS IMPORTANT INFORMATION RELATING TO YOUR CHILD'S SAFETY, IT IS YOUR RESPONSIBILITY TO REVIEW THIS
INFORMATION WITH YOUR CHILD AND MAKE SURE THEY ARE FULLY AWARE OF ALL THE INFORMATION AND WARNINGS WITHIN THE
MANUAL. PLEASE CAREFULLY READ THIS MANUAL BEFORE YOU COMMENCE ASSEMBLY OF THIS SCOOTER AND REVIEW THIS INFORMA-
TION WITH YOUNG RIDERS BEFORE THEY RIDE.
ASSEMBLY:
1.Open the box and take out the parts. Please check whether all parts and components are included.
2.Firmly press the handlebar down until you hear the handlebar locking into position. Give the handlebar a tug. If it feels secure, then
assembly is complete!
WARNING: MAKE SURE THE HANDLEBAR IS SECURELY FASTENED, AND NOT LOOSE.
3. According the suitable height(1.2.3) assembly the seat,then put the stent in correct hole(1.2.3) on the back seat .
4. Attach the plastic cover and drill in screw.
5. Install push and pull rod.
CLEANING AND CARE
1. The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
2. Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage
of the metal and plastic parts and fading of the fabrics of the crib.
3. When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low
room temperatures.
ENGLISH
