Cleaning And Maintenance - Kikkaride ROADSTER Instrucciones De Uso

WARNING!
• Carefully read the instructions for use of the scooter before use.
• The scooter must only be assembled by an adult.
• The scooter should be tested by an adult.
• When using the scooter we recommend the use of protective equipment - headgear, knee and elbow protectors, appropriate shoes.
• Before using the scooter, you should instruct the child how to drive it. Using the scooter requires special skills and should be used with caution to avoid falls and accidents.
• Use the scooter only during the day on equally safe rails and at a safe distance from streets and roadways on which vehicles are moving.
• This scooter is not designed for aggressive driving, tricks and jumping!
• It is not allowed to climb and descend from slopes.
• The scooter brake is not intended to stop when descending from slopes.
• It is not allowed to drive on this model at speeds above 15 km / h.
• The use of a scooter by children is only allowed under the supervision of an adult.
• Check the tightness of all screws and joints before usage.
• Do not place objects or luggage on the handlebar to avoid the risk of damage to the steering wheel
equilibrium.
• Use away from rivers, pools, stairs or obstacles.
• Do not change or modify the scooter design. If necessary, contact your provider or a manifacturer for replacements and instructions.
• Do not use spare parts and other components not supplied by the manufacturer. The manufacturer assumes no liability for safety if spare parts are other than those
originally approved for the type or recommended by him.
• Regular maintenance increases the safety of the scooter.
• Always check that the steering system is properly adjusted and that all fasteners are secure and not breakable.
• The scooter is intended to be used by only one child with weighting up to 50 kg. It is not recommended for children under 3 years old.
• This product complies with European standard EN 71. The materials used gor making of this product are suitable and safe for children' s health.
1. OPENING METHOD
Folding steps
1.1. Left hand press and hold the scooter head, the vertical bar folding is set to the front line in the head direction about 1 cm by right hand
1.2. While the folding sleeve is pushing forward in the direction of the scooter head, lift up the vertical bar.
1.3. After fully erecting the vertical bar, the folding sleeve is lowered back into position.
2. CONTAITING METHOD
Press the vertical bar folding sleeve down about 1 cm. While folding and covering, place the vertical bar upside down and flat.
Note: the folding mechanism is a combination of plastic and metal.
3. STEERING METHOD
CORRECT
Swing the handle left and right . Front wheel tilting steering
The unique front wheel tilting steering device can make the wheel turn left or right flexibly, by using the body weight to control the direction and the baby's natural
movement to exercise the body balance ability, scooter on the wide road or square is like skiing and surfing.
This scooter controls the turning direction by tilting the center of gravity of the body, and the turning can be realized by tilting the handlebar from left to right.
4. WRONG : Don't turn the handle. Rotating the handle can cause damage to the lever.
5. BRAKE METHOD
How to use the brake : Put one foot on the brake pad during riding, which can realize to brake. Lift one foot to release the brake
Notice: Make sure your child does not slip down from any steep slopes. The brakes are not designed to slow down at high downhill speed.
6.LIFTING METHOD
LIFT THE LEVER STEP:Unscrew the lifting lock in counterclockwise. Press and hold down the marbles in the limit hole of the lever. Pull the scooter body up until the marble
pops"out. Tighten the lifting lock in clockwise.
LOWER THE LEVER STEP: Unscrew the lifting lock in counterclockwise. Press and hold down the marbles in the limit hole of the lever. Press down on the scooter body until
the marble pops out. Tighten the lifting lock in clockwise.
7. SEAT FOLDING METHOD
The seat must be fixed by the plastic Black Ring, so it has only one fixed height and cannot be adjust height up.
Folding steps:1. Lift the seat straight up and fold into the lever. 2. Open the seat directly by pulling it apart.
8. SEAT ROTATION
Open the seat front lock. When the lock is open, the whole seat is pulled up. After pulling the seat up rotate the whole it lock 180 seat buckle is degrees pulled upward up
clockwise. Then insert the hexagon buckle the lever downward, close the lock buckle upward and complete the rotation.

9. CLEANING AND MAINTENANCE

Please wipe down the dirt and dirt with a damp cloth. Do not use industrial cleaning agents, or they may damage the surface of the product. Do not use alcohol or
detergent with alcohol or ammonia, or it may cause corrosion to plastic parts of the product, or soften stickers or other appendages are not allowed. Scooters shall be
stored in a dry, dust-free place.
ENGLISH