Instructions For Safe Operations - PULOX PO-200 Manual De Instrucciones


Uncomfortable or painful feeling may appear if using the
device ceaselessly, especially for the microcirculation barrier
patients. It is recommended that the sensor should not be
applied to the same finger for over 2 hours.

For the individual patients, there should be a more prudent
inspecting in the placing process. The device can not be
clipped on the edema and tender tissue.
 The light (the infrared is invisible) emitted from the device is
harmful to the eyes, so the user and the maintenance man
should not stare at the light.

Testee can not use enamel or other makeup.
 Testee's fingernail can not be too long.

Please refer to the correlative literature about the clinical
restrictions and caution.

This device is not intended for treatment.
The User Manual is published by our company. All rights reserved.
1. Safety

1.1 Instructions for Safe Operations


Check the main unit and all accessories periodically to make
sure that there is no visible damage that may affect patient's
safety and monitoring performance about cables and
transducers. It is recommended that the device should be
inspected once a week at least. When there is obvious
damage, stop using the device.
Necessary maintenance must be performed by qualified

service engineers ONLY. Users are not permitted to maintain
it by themselves.

The oximeter cannot be used together with devices not
specified in User's Manual. Only the accessory that appointed
or recommendatory by manufacture can be used with this
device.

This product is calibrated before leaving factory.
1.2 Warning
 Explosive hazard—DO NOT use the oximeter in environment
with inflammable gas such as some ignitable anesthetic
agents.

DO NOT use the oximeter while the testee measured by MRI
and CT.
EN