PULOX PO-300 Manual De Instrucciones página 21

Pause the alarm sound
indication
Open the alarm sound
indication
Close the pulse sound
indication
Open the pulse sound
indication
Menu button/Exit standby
mode
Type BF
USB
Serial number
R● Record state
10. Function Specification
Information
The Pulse Oxygen Saturation ( SpO
Pulse Rate (bpm)
Pulse Intensity (bar-graph)
SpO Parameter Specification
2
Measuring range
Accuracy
Average value
Pulse Parameter Specification
Measuring range
Accuracy
Average pulse rate
Safety Type
Pulse Intensity
Range
Battery Requirement
Voltage 3.7 rechargeable lithium battery × 1
Battery working life
Charge and discharge no less than 500 times.
Power Adapter
Input Voltage
Output voltage
Output current
Oximeter Probe
Wavelength:660nm~905nm
Dimensions and Weight
Dimensions
Weight
Display Mode
) 2-digit digital LCD display
2
3-digit digital LCD display
Bar-graph LCD display
0%~100%, (the resolution is 1%).
70%~100%:±2% ,Below 70% unspecified.
Calculate the Average value in every 4 measure value.
The deviation between average value and true value does not
exceed 1%.
30bpm~250bpm, (the resolution is 1bpm)
±2bpm or±2% (select larger)
Moving calculate the Average pulse rate every 4 cardio-beat
cycle.
The deviation between average value and true value does not
exceed 1%
Interior Battery, BF Type
Continuous bar-graph display, the higher display indicates the
stronger pulse.
100 to 240 VAC, 50/60 Hz
DC 5 V
1000mA
57(L) × 32(W) × 30 (H) mm
About 50g (with the lithium battery*1)
Storage and Transport
Temperature limitation
Storage and Transport
Humidity limitation
Storage and Transport
Atmospheric pressure
limitation
This side UP
Fragile, handle with care
Keep dry
Recyclable
Bluetooth: ON
(Bluetooth wired equipment)
'
s