How To Use - VOX electronics TM-1013 Manual De Usuario

KNOW YOUR BLENDER
Measure cup
Jar cover
Glass jar
Seal ring
Blade Base
Speed knob
Main unit
SPEED KNOB

HOW TO USE

Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measuring cup, lid, seal ring 1, jar unit, seal ring 2, and blade
assembly) has already been assembled into the motor unit. Disassemble to wash all
detachable parts except the motor unit. Refer to the latter chapter CARE AND CLEANING.
3. Once all pieces have been cleaned and thouroughly dried, reassemble.
1) Invert the jar unit onto a level surface, holding the jar handle, put the seal ring 2 and blade
assembly onto the jar base bottom and secure the blade assembly by turning it counter-clockwise
until it is tight（See Fig.3.)
2) Reposition the jar assembly with its open end upwards. Wrap the seal ring 1 around the lid
bottom and put the lid onto the jar assembly. Place the measuring cup exactly into the lid by fitting
the small projection on both sides of the cup into the slots of the lid and turn the cup clockwise until
tight. （See Fig.4）
3) Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar
bottom. (See Fig.5）
Fig.1
Fig.1
Fig.2