ProKlima 24995346 Manual De Instrucciones página 39

FAN-111544.1 / FAN-111544.2
PARTS DESCRIPTION
1． Front guard
2． Rear guard
3． Fan blade
4． Motor cover
5． Speed button
6． Speed indicator lights
7． Timer button
8． Timer indicator lights
9． Fan holder
BEFORE FIRST USE
1. Remove all the packaging.
2. Stretch out the fan holder and make the fan stand stable on a flat, dry and heat-resistant surface. Make
sure to spread the bracket fully before power in so that the fan body stay steadily to avoid fan blade crack.
OPERATING INSTRUCTIONS
1. Put the plug into a suitable socket and you will hear one beep sound when the power is connected.
2. Press the speed button to turn on the fan and select fan speed. The fan starts from low speed (speed "1").
Press the button again, the fan runs in medium speed (speed "2"). If high speed (speed "3") is needed, just
press the button one more time. When the fan is running in speed "3", press the speed button can turn off
the fan.
3. You can set the fan to turn on after 1 / 2 / 4 hours or to turn off after 1 / 2 / 4 hours ("1h" = 1 hour, "2h" = 2
hours, "4h" = 4 hours). When the fan is not running, you press the timer button to set the automatic
turn-on time; when the fan is working, pressing the timer button is to set the automatic turn-off time.
Presses of the timer button cycle through "one hour timer", "two hours timer", "four hours timer" and "no
timer".
4. The preferred tilting angles can be adjusted by pushing the fan guards back and forth within 180°. Be
careful not to touch the fan blade with hands or any other objects when the fan is running.
Notes:
1. Every press of the buttons will lead to a beep sound. There is also a beep sound before the fan
automatically turn on or turn off when the timer has been set.
2. When you select the speed or timer, the indicator light(s) above the selected setting(s) will turn on. The
indicator light above timer setting will change to indicate how much time left. For example, you have
selected "4h" for the fan to turn on automatically. If there is 3 hours left, the indicator light above "4h" is
still on, and if there is 2 hours left, the indicator light above "2h" will turn on instead.
3. The speed setting can only be "1" when you set the fan to automatically turn on. If you press the speed
button, the fan will turn on immediately.
4. The automatic turn-on and automatic turn-off functions cannot be used at the same time.
5. The fan will turn off automatically if there is no operation during continuous 10 hours. Two beep sounds
will be sent out at this moment.
- 38 -
GBR