2.
For different tasks, choose different accessories. See blow instructions specifically. Keep the speed button
pressed for operation. To turn off the device, simply release the button.
3.
When the low speed is selected, you can also slide the variable speed selector to adjust the speed. The
speed will gradually get higher when the selector is slid from left to right. However, this speed selector is
ineffective when the turbo button is pressed, since the turbo speed is already the maximum. It's
recommended to start with low speed to avoid splashing.
TO USE THE BLEND ROD
If you want to blend in a saucepan directly, take the pan off the heat and let it cool slightly. Otherwise your hand
blender could overheat and you may be hurt by splashed hot liquid.
1.
Fit the hand-held stick inside the blend rod, turn and lock.
2.
Plug in. To avoid splashing, place the blade completely in the food before switching on.
3.
Hold the container steady. Then select and press your desired speed.
4.
Don't let liquid get above the join between the hand-held stick and blender shaft.
5.
If your blender gets blocked, unplug before cleaning.
6.
After use, unplug and dismantle.
TO USE THE CHOPPER
You can chop meat, cheese, vegetables, herbs, bread, biscuits and nuts.
Don't chop hard foods such as coffee beans, ice cubes, spices or chocolate, otherwise you will damage the blade.
1.
Remove any bones and cut food into 1-2cm cubes.
2.
Fit the chopper blade over the pin in the bowl.
3.
Add your food.
4.
Fit the chopper cover, make the grooves aligned.
5.
Fit the hand-held stick, turn and lock. (Take reference with below line drawings for the chopper assembly.)
6.
Plug in. Hold the bowl steady. Then select and press your desired speed.
7.
After use, unplug and dismantle.
Caution:
Don't touch the sharp blade.
Remove the chopper blade before emptying the bowl.
Never remove the cover until the blade has completely stopped.
- 24 -
80.08.0015