cecotec HidroBoost 1600 Car&Bike Manual De Instrucciones página 25

• Separate the lance from the gun.
• Rotate the nozzle to the narrow stream setting. This activates the fan blades.
• Use the cleaning kit provided, or any other type of pointed element such as an unfolded
paper clip to clean the nozzle. Insert the wire into the nozzle hole and move back and
forth until debris is dislodged. (See Figure 2).
• Remove debris by back-flushing water through the nozzle. To do this, point the end of a
garden hose (with water running) to the nozzle's end for 30-60 seconds.
ANGLE FROM THE HIGH-PRESSURE HOSE TO THE CLEANING SURFACE
When spraying water against a surface, maximum impact is reached when the water strikes
the surface head on. However, this type of impact tends to cause dirt particles to imbed in the
surface, thereby preventing the desired cleaning action.
The optimum angle for spraying water against a cleaning
surface if 45 degrees.
Spraying water against a surface at this angle provides for the
most beneficial impact force combined with efficient removal
of debris from the surface.
DISTANCE FROM CLEANLING SURFACE
The impact force of the water is increased as the pulverizing
nozzle is moved closer to the surface.
HOW TO AVOID DAMAGING SURFACES
Damage to cleaning surfaces occurs because the impact force of the water exceeds the
hardness of the surface. The impact force can be varied by controlling the three previously
noted items. Never use a narrow high impact stream on a surface that is susceptible to damage.
Avoid spraying windows with a narrow high impact stream as this may cause breakage.
The surest way to avoid damaging surfaces is to follow these steps:
• Before triggering the gun, adjust the pulverizing nozzle to a wide stream.
• First, follow the distance and angle instructions above.
• Vary the spray angle, stream type and the distance to the cleaning surface until optimum
cleaning efficiency is achieved without damaging the surface.
Fig. 2
HIDROBOOST 1600 CAR&BIKE
ENGLISH
25