Optional Accessories - Makita TM3010C Manual De Instrucciones

Dust extraction attachment (optional
accessory)
4
8
9
10
7
► 1. Joint 2. Nozzle band 3. Dust nozzle 4. Dust
attachment 5. Felt ring (ø 37 mm (1-7/16")) 6. Pad
(with OIS marking) 7. Holder bolt 8. Spacer 9. Felt
ring (ø 47 mm (1-7/8")) 10. Pad (with STARLOCK
marking)
2
3
► 1. Nozzle band 2. Protrusions 3. Holes
• Install joint, dust nozzle and dust attachment.
• Install the nozzle band on the tool so that its pro-
trusions fit in the holes in the tool to secure it.
3
5
2
6
1
1
• Put the felt ring and the sanding pad on the dust
attachment and then secure them with the applica-
tion tool installation bolt.
1
When you wish to perform cleaner operation, connect a vac-
uum cleaner to your tool. Connect a hose of vacuum cleaner
to the dust extraction attachment (optional accessory).
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, carbon
brush inspection and replacement, any other maintenance or
adjustment should be performed by Makita Authorized or Factory
Service Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Segment saw blade
• Round saw blade
• Plunge cut saw blade
• Scraper (rigid)
• Scraper (flexible)
•
Serrated seg blade
• General joint cutter
• HM remover
• HM seg saw blade
• HM sanding plate
• Diamond seg sawblade
7 ENGLISH