Koenic KST 245 Manual De Instrucciones página 22

English
Cleaning and care
Warning
• Unplug the product and let it cool down
completely before cleaning. Never
immerse electrical parts of the product in
water during cleaning or operation. Never
hold the product under running water.
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
Rinse out the water tank regularly with
15
clear water and then empty it.
Clean the product's exterior surfaces with
16
a slightly damp cloth and then dry them
thoroughly. Make sure that no water enters
the product interior (for example, through
the switch). Rinse off the calcium particles
and other deposits from the soleplate with
a damp cloth and some detergent.
Note
In order to keep the soleplate smooth, it
should not come into contact with metal
objects.
Caution
Do not use any abrasive sponges, vinegar or
other chemicals to clean the soleplate.
• Store the product at a cool, dry and clean
place and out of reach of children and
animals.
22
IM_KST245_151217_V04_HR.indb 22
Descaling
The product must be descaled regularly
depending on the water hardness of your tap
water.
When the descaling indicator lights on,
17
switch of the steam station and let it cool
down completely.
Remove the anti-calc rinsing cap and
18
open the anti-calc rinsing valve with the
delivered key. Pour out remaining water
into a sink.
Warning
Do not open the anti-calc rinsing valve when
the boiler is still heating or under pressure. In
order to ensure safety, let the product cool
down completely before open the valve.
Fill the boiler system with 150 ml. vinegar
19
and close the anti-calc rinsing valve. Shake
the boiler system gently for 10 -15 seconds
and pour out the vinegar immediately.
Repeat this process 2- 3 times. Rinse the
boiler system with tap water for several
times and close the anti-calc rinsing valve.
If the descaling indicator still lights on,
20
press the Reset button for 3 seconds to
turn off the indicator.
17/12/15 10:10 AM