Refilling The Water Tank; Overheat Protection; After Use - Koenic KST 245 Manual De Instrucciones

When the boiler has reached the set
10
temperature for steam ironing, the related
indicator will turn on steady.
You can turn on the steam permanent on
11
the iron by pressing the steam button. To
stop release the steam button.
Caution
Never directly point the steam boost into the
direction of people or animals!

Refilling the water tank

The water tank can be re-filled any time
12
during operation. If the water level is low
the "no water alarm"
tank needs to be re-filled. Follow the steps
under chapter Fill in water. Press the
RESET button to turn off the "no water
alarm" indicator. Steam function can be
used again.

Overheat protection

If the water level is low the "no water alarm"
will alert and the tank needs to be re-filled. For
safety reason, the overheat protection will turn
off the steam function for few minutes. Dry
ironing function is still available. After cooling
down the indicator lights off and the steam
function can be used again.
IM_KST245_151217_V04_HR.indb 21
will alert and the

After use

Put the iron back on the steam station
13
after use. If the steam function is not being
used for 10 minutes, the steam station will
be turned off automatically. Alternative
press to switch off the steam station.
Unplug and let the product cool down for
at least 3 hours.
Note
Empty the water tank and boiler system
completely after each use.
Transport
For transportation purpose, the iron can be
locked on the steam station.
To lock the iron for transportation purposes
14
slide it in place on the steam station until
locks in. To unlock the iron, e.g. as for
normal use slide out the iron from the
steam station while pressing and hold the
unlock button.
English
21
17/12/15 10:10 AM