Markings On The Product; Class 1 Laser Product; Environmental Information - Telefunken SOMNIA22ESM17 Manual De Instrucciones

Tabla de contenido
• Do not dispose of the batteries in fire or with hazardous
or flammable materials.
Warning: Batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
Caution
Risk of electric shock
Maintenance

Markings on the Product

The following symbols are used on the product as
a marker for restrictions and precautions and safety
instructions. Each explanation shall be considered
where the product bears related marking only. Note
such information for security reasons.
Class II Equipment: This appliance is designed
in such a way that it does not require a safety
connection to electrical earth.
Class II Equipment With Functional Earthing:
This appliance is designed in such a way that it
does not require a safety connection to electrical
earth, the earth connection is used for functional purposes.
Protective Earth Connection: The marked
terminal is intended for connection of the
protective earthing conductor associated with the
supply wiring.
Hazardous Live Terminal: The marked
terminal(s) is/are hazardous live under normal
operating conditions.
Caution, See Operating Instructions: The
i
marked area(s) contain(s) user replaceable coin
or button cell batteries.
CLASS 1
LASER PRODUCT
WARNING
Do not ingest the battery, Chemical Burn Hazard
This product or the accessories supplied with the
product may contain a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead
to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
Serious injury or death risk
Dangerous voltage risk
Important maintenance
component

Class 1 Laser Product:

This product contains Class
1 laser source that is safe
under reasonably foreseeable
conditions of operation.
WALL MOUNTING WARNINGS
• Read the instructions before mounting your TV on
the wall.
• The wall mount kit is optional. You can obtain from
your local dealer, if not supplied with your TV.
• Do not install the TV on a ceiling or on an inclined wall.
• Use the specified wall mounting screws and other
accessories.
• Tighten the wall mounting screws firmly to prevent the
TV from fall. Do not over-tighten the screws.
Never place a television set in unstable or inclined
locations. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions
such as;
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the
television set.
• Ensuring the television set is not overhanging the edge
of the supporting furniture.
• Not placing the television set on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable
support.
• Not standing the television set on cloth or other
materials placed between the television and supporting
furniture.
• Educating children about the dangers of climbing on
furniture to reach the television set or its controls. If your
existing television set is being retained and relocated,
the same considerations as above should be applied.
Apparatus connected to the protective earthing
of the building installation through the MAINS
connection or through other apparatus with a
connection to protective earthing – and to a
television distribution system using coaxial cable,
may in some circumstances create a fire hazard.
Connection to a television distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11)

Environmental Information

This television is designed to be environment friendly. To
reduce energy consumption, you can follow these steps:
If you set the Energy Saving to Minimum, Medium,
Maximum or Auto the TV will reduce the energy
consumption accordingly. If you like to set the
Backlight to a fixed value set as Custom and adjust
English - 59 -
WARNING
WARNING
Tabla de contenido
loading

Tabla de contenido