Operating The Shredder - Genie 550 MXCD Manual Del Usuario

7. Please do not leave the document shredder unattended e.g. in the event children
or pets are nearby.
8. The device may not be operated with a damaged power cord.
9. For indoor use only.
10. This machine is no toy. Keep it away from children and pets.
11. Please don not shred credit cards, CDs/DVDs and paper at the same time
12. The device should be placed near a socket which is easily accessible
Please read the manual before operating the machine
16.
Setup:
1.
Place the CD/DVD & Credit card shredding plastic bin provided with your shredder, inside
the appropriate rib position attached to the inside of waste bin.
2. Place the shredder securely on top of the wastebasket . Be sure not to allow your fingers to
get between the basket and the shredder as you are placing the shredder in place.
Important note:
The device is equipped with an escapement which prevents operation if the cutting unit
is not places properly on the waste bin. The cutting unit must be places well-fittingly on
the waste bin. The there located enhancement will loose the escapement and clear
operation. If this is not the case, check the fitting. You should hear a gentle click while
fitting the cutting unit on the waste bin.
3. Plug the power cord into any standard 230-240 volt AC outlet .

Operating the shredder:

The Main Switch is located on the top of the shredder . The Main Switch has three (3)
settings.
1. When "auto" is selected, the shredding process is started automatically by inserting the
paper, a disk or a credit card into the feed opening. When inserting papers, please do not
- 8 -