AKG CK 31 Manual De Instruccione página 25

Ocultar thumbs Ver también para CK 31:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
Fig. 5a: LM 3/LM 3L
connection socket
and clamp
3. Snap the connection socket of the lavalier module
into the holding claws on the clamp.
The holding claws let you fix the connection socket in
a 12, 3, 6, or 9 o'clock position.
4. Clamp the microphone on the user's clothing (see
fig. 5b) as close as possible to the user's mouth.
Remember that gain-before-feedback will be the
higher the smaller the distance between the micro-
phone and the mouth!
5. Make sure to aim the microphone at the user's mouth.
Note: You may also clamp the microphone to
suitable decorations (e.g., a backdrop).
1. Insert the DPA phantom power adapter into the belt
clip and fix the phantom adapter on the belt.
2. Use a shielded cable to connect the DPA phantom
power adapter to a microphone input with phantom
power.
3. If the phantom power on your mixing console is
switchable, switch the phantom power on. (Refer to
the instruction manual for your mixing console.)
4 Installation and Connections
Lapel
Selvedge
Tie
Fig. 5b: Fixing the LM 3/LM 3 L
Shirt
pocket
T shirt
4.5.1. LM 3 Audio
Connection
25
Tabla de contenido
loading

Este manual también es adecuado para:

Ck 32Ck 33

Tabla de contenido