Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
EN

Spray gun

B
C
A
D
Before connecting accessories make sure the compressor is shut down.
Do not spray oil or other inflammable liquids over naked flames or hot surface to avoid possible fire hazards.
ACCESSORIES
Only use accessories and consumables that are designed for the use with this tool.
Select the best available inserted/mounted accessories/consumables for the lowest possible noise level and vibration.
Replace them in case of an increased noise level and/or vibration.
Make sure that the inserted/mounted tool/accessory is properly held by the retainer and make sure that the retainer
is in good condition. Never use the tool without a retainer as this may cause high speed projectiles.
Use the inserted/mounted accessory/tool according the manufacturer specifications.
USING A PNEUMATIC TOOL
Before start using the tool, make sure that you are familiar with the workplace and surrounding area.
Always obey the safety regulations for the work area you are working in.
Hold the tool always firmly with both hands.
During operating the tool, the operator may be exposed to hazards as crushing, impacts, heat, vibration, cuts,
abrasions, etc: Wear suitable gloves.
Any person handling the tool must be able to handle the size, weight and power of the tool.
Always be prepared for normal/abnormal movements/forces generated by the tool.
Keep your body in balance, place your feet safe and secure.
In case of interruption of the air supply, release the lever/trigger.
When using a power tool, you may experience discomfort in your hands, arms, shoulders, neck and other parts of
your body.
If you experience symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness,
burning sensation, or stiffness: Do not ignore these warning signs. Stop using the tool, tell your employer and
consult a qualified health professional.
USING THE SPRAY GUN
Before operating the equipment, put some oil drops in the air inlet opening (A) of the pneumatic tool.
Choose the correct nozzle (C) and mount it onto the pipe. Fill the suction cup (D) with the working liquid and firmly
tighten to the spray gun. Depress the trigger (B) to use the tool.
67
Tabla de contenido
loading

Este manual también es adecuado para:

G-532G-102G-570G-560a2809913403G-852

Tabla de contenido