Fitting / Removing Brush Heads; Brushing One's Teeth - Dentalux DRZ 3.0 A1 Instrucciones De Uso

Fitting / removing brush heads

To remove the brush head 1, turn it clockwise and then pull it upwards.
To fi t the brush head 1 place it slightly off set on the hand element 2 and
then turn it anti-clockwise.
The brush head 1 must engage on being put back on. To avoid damage
to the appliance, use only original brush heads.
(For replacement brush heads, see the order card)

Brushing one's teeth

Warning
Due to the unaccustomed operation some gum bleeding may initially occur,
this is normal. Should this continue for more than two weeks, consult your
dentist.
• Place the brush head 1 on the hand element.
• If need be, remove the protective cap 5.
• Moisten the brush under fl owing water.
• Apply some toothpaste to the moistened brush.
Notice
Wait until the appliance is in the mouth before switching it on, to avoid
spray.
• Switch the toothbrush on with the on/off switch 3.
Notice
This toothbrush has a 30 second interval timer, so that all four jaw quandrants
can be cleaned equally.
• Divide your jaws into four sections (quadrants): upper left, upper right,
lower left and lower right.
- 20 -