Schneider Schirme Lotus Instrucciones De Montaje página 42

Assembly
Place the two elements of the cross base (A + B) one on top of the other as
shown and screw firmly to the tube (C).
Use the screws M8x16 (D) and one washer (E) for each screw.
Now put the assembled cross base at the location where the umbrella is to
be set up. Make sure the ground underneath is solid and level.
Now insert 4 paving slabs in the cross base.
IMPORTANT:
Always use all four paving slabs with a size of 50 x 50 cm!
Never use the umbrella stand without paving slabs.
EN
42