JL-901
GB
USER'S GUIDE
• In order to fasten the safety belt overlap the two straps and insert them in the buckle of the crotch belt until
it clicks.
• To release the safety strap press the red button on the buckle of the crotch strap.
• The seat has two holes for height adjustment of the belt that you can choose according to the child's height.
The belt should be neither too high nor too low compared to the shoulders of the child; the right position is
that the baby's shoulders are just above the hole.
• The seat is equipped with: a pillow
• To mount the pillow, put the seat belts and crotch straps in the slots of the pillow.
ATTENTION: to rotate the handle, press the two red buttons located on the handle and at the same time place it in
the desired position, until you hear the click of positioning.
Instructions for use in the car
• Put the car-seat with your child on the seat, remember to fasten the seat belt to the child.
• In the car the handle must be fully lowered forward near the back of the car seat. Place the handle forward
ensuring the correct positioning of the "click". Verify that the belt is tight and locked for adequate security.
PRODUCT CLEANING
• Your product needs a minimum of maintenance.
• The cleaning and maintenance must be performed only by adults.
• All moving parts must be kept clean and if necessary, lubricated with light oil.
• Periodically clean the plastic parts with a damp cloth, do not use solvents or similar products.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorption device with solvents or similar products.
• Protect the product from weather, water, rain or snow; continued and prolonged exposure to sunlight could
cause colour changes in many materials.
• Store the product in a dry place.
7