Tabla de contenido
SIGNODE BXT2-19
1
➟
Fig. 12
1
2
AUTO
➟
MAN.
SOFT
A)
1
2
3
4
1200 1550 1900 2250 2600 2950 3300 3650 4000 N
264
341
418
496
B)
1
2
3
4
400
550
700
850 1000 1150 1300 1450 1600 N
88
121
154
187
Fig. 13
1
➟
Fig. 14
1
2
Fig. 15
20
2
3
=
+ / -
AUTO
AUTO
MAN.
MAN.
=
SOFT
SOFT
3
5
6
7
8
573
650
727 804 882 lbs.
5
6
7
8
220
253
286 319 353 lbs.
2
3
=
+ / -
3
4
5.6 SETTING STRAP TENSION
– Press the „Function" button (12/1) briefl y.
– Press the „Strap tension" button (12/2) until the
fl ashing digital display (12/3) shows the required strap
tension. Wait two seconds until the new setting is
saved.
1 = min. strap tension approx. 400/1200 N*
(88/264 lbs.) (PP)
9 = max. strap tension approx. 1600/4000 N*
(353/882 lbs) (PET)
* refer to Chapter 5.7
5.7 SETTING SOFT TENSION
AUTO
The following two strap tension ranges can
MAN.
be set on the tool:
SOFT
A = 1200–4000 N (264–882 lbs.)
standard, PET straps
B = 400–1600 N (88–353 lbs.)
Soft tension*, PP straps
* Soft tension: tension wheel starts slowly. Prevents
9
excessive dirt on PP straps.
Setting soft tension:
– Press the „Function" button (13/1) briefl y.
9
– Press the „Mode of operation" button (13/2) several
times until the green „SOFT" LED indicator (13/3)
lights up together with the desired mode of operation
(refer to chapter 5.5).
5.8 SETTING WELDING TIME
– Press the „Function" button (14/1) briefl y.
– Press the „Welding time" button (14/2) until the
fl ashing digital display (14/3) shows the required
welding time. Wait two seconds until the new setting is
saved.
1 = minimum welding time
7 = maximum welding time
5.9 SETTING STRAP WIDTH
The tool can be used with two different strap
widths:
5
– 15–16 mm (
/
8
3
– 18–19 mm (
/
4
a) Change strap width from 15–16 mm to 18–19 mm
– Remove battery from tool.
– Release sunk screw (15/2) and remove strap stop
16 mm (15/1).
– Lift the rocker lever towards the handle, release
sunk screw (15/4) and remove strap guide 16 mm
(15/3).
Continuation page 23
")
")
09.09
Tabla de contenido
