Brigmton BBOARD-63-N-A-R-P Manual De Instrucciones página 20

MAINTENANCE
The scooter must be serviced. This chapter mainly describes relevant steps
and important operation reminders for maintenance. Please make sure that
the power and the charging socket are disconnected before performing the
following operations. It should not be operated when the battery is being
charged.
CLEANING
- Make sure that the power and the charging jack are disconnected.
- Clean the scooter case with a soft cloth.
NOTE: Make sure that no water or other liquids enter the balance scooter's
internal components as this may permanently damage the scooter's
electronics / batteries. There is a risk of personal injury.
STORAGE
- If the storage temperature is below 0 ° C, please do not charge the
scooter. You can place it in a warm environment (5-30 ° C) for charging.
- You can cover the scooter in order to avoid dust.
- Store the scooter inside by placing it in a dry and suitable place.
- If it is charged at higher or lower temperatures, there is a risk of reduced
battery performance and potential risk of product damage and personal
injury.
- Store the product at temperatures between 5 ° C and 30 ° C. (The
optimum storage temperature is 25 ° C)
- Charge and store the product in an open, dry area, away from flammable
materials.
- Do not store the product in direct sunlight or near flames.
- If the product is left to other people, for example, during a holiday
period, it should be partially charged (20-50% load). Not fully charged.
- When shipped from the factory, the product is often only partially
charged. Keep the product in a partially charged state until it is to be used.