Safety Instructions; User Manual; Important Safety Warning - HQ-Power VDP250MHW16FL2 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling. This
device should be returned to your distributor or to a local recycling service. Respect the
local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPOWER™! Please read the manual thoroughly before bringing this device
into service. If the device was damaged in transit, do not install or use it and contact your dealer.
The VDP250MHW16FL2 flight case should come with 2 x AERON 250W moving heads, 2 x 250/2
®
Sylvania lamps, an XLR connection cable and this manual.
This device needs periodical maintenance.
Dust inside the unit must be removed. Ventilation holes must be kept clean.
Replace the lamp before its end of life. Consult lamp manufacturer.
Inspect above points before each operation. Not respecting these warnings may result in
overheating or fire and warranty will be void.
Anyone intending to install or operate this device must read and clearly understand this
manual before continuing. Keep this manual with the device for future reference.

2. Safety Instructions

Keep the device away from children and unauthorised users.
Be very careful during the installation: touching live wires can cause life-threatening
electroshocks.
Do not touch the device during operation as the housing heats up.
Respect a minimum distance of 0.5m between the devices' light output and any
illuminated surface.
Indoor use only. Keep this device away form rain, moisture, splashing and dripping
liquids. Never put object filled with liquid on top.
Always disconnect mains power when the device is not in use or when servicing or
maintenance activities are performed. Handle the power cord by the plug only.
• This device is designed for professional use on stage, in discos, theatres, etc. The
VDP250MHW16FL2 should only be used indoors and connected to an alternating current of max.
230VAC/50Hz.
• A qualified technician should install and service this device.
• Use an appropriate safety cable to fix the device (e.g. VDLSC8).
• Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room
temperature.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have
a qualified person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of
this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if
necessary.
• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
29/07/2009
VDP250MHW16FL2

User manual

IMPORTANT SAFETY WARNING

4 ©Velleman nv