I - Door Reversibility - Eurocave 6000 Serie Modo De Empleo

I. Door reversibility (Full Glass only)
x3
A B
This allows you to change the direction in which the door opens. Follow
the instructions below (example for changing a right-hand door into a
left-hand door):
4
1
Unscrew the three screws using a "T25" Torx wrench.
2
Remove the upper hinge.
3
Carefully remove the caps using a thin blade.
4
Remove the cabinet door by opening it slightly, then lifting it upwards.
5
Unscrew the door pin.
6
Carefully remove the cap using a thin blade and assemble the pin in its
place. Reposition the cap on the opposite side
7
7
Unscrew the two screws and the door catch.
Unscrew the two screws on the opposite side and remove the two
washers.
N6000-0815-7L-V9.indd 9
- I
4
NSTALLING YOUR WINE CABINET
x3 x3 x4
C D E F
1
2
3
8
A
Upper hinge
B
Caps
C
Caps
G H J
D
Torx screw
E
Hex screw
x2
F
Door catch
G
Lower hinge
8
Mount the door catch on the desired opening side, using screws.
Replace the washers, then the screws, on the side opposite the door catch.
9
Turn the door through 180°.
Warning: the door is very heavy.
precautions to ensure that you do not injure yourself or drop it.
10
Put the door back on its pin.
11
Put in place the upper hinge.
12
Screw the hinge so that the door is completely parallel to the cabinet.
Check that the door seal adheres well to the cabinet (by closing the door),
to ensure that it is completely air-tight.
13
Put in place the caps.
H
Door pin
J
Door pin cap
Take any necessary
13
12
11
9
GB
18/09/15 11:48