General Description; Operation Mode - StetSom INFINITE 20A Manual De Usuario

Introduction
The INFINITE 20A DIGITAL POWER SUPPLY / CHARGER was designed to charge
systems (12Vdc) from 127 Vac or 220Vac networks. The INFINITE 20A automatically
operates as a highly stable battery charger (when connected to batteries) or as
a power source (when not connected to batteries). Using digital technology, the
INFINITE 20A provides the user with a higher performance and a huge advantage
over other systems built around transformers.

General Description

PT-BR US-ES
1
Power supply cable
1
AC 127V/220V
Selector switch
2
AC 127V/220V
3
DC output 7,5Vdc to 14,4Vdc
Power ON
4
(Blue LED)
PROT
5
(Red LED)
6 RESET button

Operation Mode

The INFINITE 20A works on 127Vac or 220Vac voltages. You must select the correct
voltage using the 127V / 220V switch.
ATTENTION! Before connecting the INFINITE 20A to an electric power source, make sure
that the selected voltage is the same as the one supplied by the socket that you will use.
LED's
• PROT (RED LED): When lit, it indicates that the electric source is supplying power
or that there was a short circuit in the DC output or voltage is below the minimum
requirement of 7.5 Vdc (Undervoltage).
• POWER ON (BLUE LED): Indicates that the INFINITE 20A is turned on and ready to
supply power.
2
3
4
5
6
5