Technical Features; Use Instructions - Master FACTORY FACT 20 Manual De Instrucciones

stances.
Fasten the bracket to the wall by means of 2 dowels at least, passing
through the A holes (fig. 1). Use the B holes just as reference (fig. 1).
The heater can be angled on its bracket in correspondence to the C
screw, and the modules can be pointed in correspondence to the D
couplings (fig. 2 ). When the adjustment has been made, tighten all
the screws.
Ceiling mounting with chains (not provided)
Fasten the chains (having an appropriate length) to the ceiling, and
hook them to the heater in corrispondence of all the four E holes by
means of the "S" shaped rings enclosed inside the packaging (fig. 3).

3. TECHNICAL FEATURES

The infrared Industrial Heaters range is constituted by appliances
having one, two, or three modules. Each module can have a 1500
W or a 2000 W lamp. The lamps of the models LG (Low Glare) are
characterized by having a low brightness (Table 2).

4. USE INSTRUCTIONS

The Industrial infrared heater was designed for zone heating on large
premises. Production departments, churches, gymnasiums are ide-
ally application sites. With high efficiency on heating from long dis-
tance, a compact size and a light weight a wide range on installa-
tion can be easy made. The comfort is immediate, no preheating is
necessary and this can give a large cost saving on wide air volume
or where there is discontinuous presence. The radiant heating give a
FACT 20-
Model
FACT 20LG
220-240 V ~
Power
supply 50-60 Hz
1 x 2000 W
Power
Lamps 1
Range 9-12 m²
2.2 kg
Weight
FACT 40- FACT 60-
FACT 40LG FACT 60LG
220-240 /
220-240 V ~ 380-415 V ~
50-60 Hz 50-60 Hz
3P+N
2 x 2000 W 3 x 2000 W
2
12-16 m² 16-20 m²
3.0 kg 3.8 kg
10
3