Hanging Vac On Storage Rack - Sears Craftsman CMXEVBE179250 Manual De Instrucciones

Hanging Vac on Storage Rack

(Fig. L, M, N, O & P)
1. Set the Vac on the floor near the Storage Rack.
Measure the distance from center of Storage Rack to
the closest electrical outlet and add 18-inches (46 cm).
Fig. L
Outlet
Distance
+
18 Inches
(46 cm)
2. Uncoil that amount of Power Cord from the Cord Wrap.
Drape the loose Cord over the top of the Vacuum and
down the front.
3. Grasp the Handle with one hand and the bottom of the
Vac Drum with the other hand. Always lift the Vac with
both hands. Lift the Vac up to the Storage Rack.
Fig. M
Cord Retainers
Cord Keeper
SP7085-2 CMXEVBE179250.indb 9
Rectangular
Opening
Handle
Upper Hook
4. Align the Upper Hook on the Vac with the rectangular
opening in the Storage Rack. Push the Vac against the
Storage Rack.
Fig. N
Storage
Rack
Retangular
Opening in
Storage
Rack
Upper
Vac
Hook
Push Vac
Against
Storage
Rack
5. Lower the Vac until the Upper Vac Hook and Lower
Hook are engaged and the bottom of the Vac Drum
rests on the Rack. The Release Tab will pop out over
top of Vac.
Fig. O
Upper
Vac Hook
Lower
Vac Hook
Release Tab
Depressed
Vac
Drum
Release Tab
Over Vac
9
10/24/19 12:48 PM