Accessory Storage; Extension Wands; Cord Storage; Diffuser Assembly - Sears Craftsman CMXEVBE179250 Manual De Instrucciones

Accessory Storage (Fig. S)
The Accessories: Utility Nozzle, Dusting Brush, Car Nozzle,
and the Crevice Tool, may be stored at the bottom of the
Storage Rack, in the Accessory Storage Bin.
The Two Extension Wands may be stored in the Wand
Slots, located on either side of the Storage Rack.
Fig. S
Extension
Wands (2)
SP7085-2 CMXEVBE179250.indb 11
Cord Storage (Fig. T)
When your Wet/Dry Vac is not in use, it should be
unplugged from the outlet.
1. Wind the Power Cord clockwise (from the rear) around
2. To secure the cord, Snap the Power Cord into the Cord
NOTE: The entire length of the cord should be wound
around the Cord Wrap Area to eliminate any tripping
Storage
hazard created by a loosely hanging cord.
Rack
Fig. T
Wand
Slots (2)
Accessories
Accessory
Storage Bin
Diffuser Assembly (Fig. U)
Connect the Lanyard to the Attachment Tab on the Vac
Motor Assembly to keep the Diffuser attached to Vac when
using the Blower Port.
The Diffuser Cap can be used in the Exhaust Port of the
Wet/Dry Vac. Installing the Diffuser Cap will allow you to
diffuse the exhaust air in any direction and reduce the
intensity of the exhaust force.
Fig. U
the Cord Wrap area on back of Vac Motor Assembly.
Clip.
Cord
Wrap
Cord
Area

TOP VIEW

Attachment
Tab
Lanyard
Diffuser
11
10/24/19 12:48 PM