Assembly Appliances In Banks - Icare 191PD1G Manual De Uso

2 - Before screwing the tap (B) onto the pan's drain
pipe, fit the ring nut (C).
3 - Provide a suitable drainage system (D) under-
neath the drain tap (B).
LEVELLING
Adjust the floor-mounted feet (A) to level the appli-
ance.

ASSEMBLY APPLIANCES IN BANKS

IT
To assemble appliances in banks (side by side)
proceed as described below.
GB
1 - Pull off the knob (A).
2 - Remove the knob unit (B).
DE
3 - Undo the screws (D) and remove the control
panels (C).
4 - Apply masking tape to the edges to be placed
FR
side by side.
5 - Apply food-approved sealant to the edges to be
ES
placed side by side.
6 - Place the appliances side by side.
7 - Connect the appliance using the screws and
nuts (E-F).
8 - Remove the excess sealant and the masking
tape.
9 - Apply the sealant to the inside of the lid (G), and
fit it to cover the fixing zone.
10 - Replace the control panels (C) and the knobs
(A-B) on completion of the operation.
English
D
B
A
E
- 14 -
C
B
A
C
D
G
F
IDM-39615401300.tif IDM-3960200180.tif
IDM-39614401600.tif
IDM-39615401400.tif