Description Of Symbols; General Safety - Triton SJA 420 Instrucciones De Uso

Introduction
Thank you for purchasing this Triton tool. This manual contains information
necessary for safe and effective operation of this product. This product
has unique features and, even if you are familiar with similar products, it is
necessary to read this manual carefully to ensure you fully understand the
instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Read instruction manual
Caution!
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Specification
Model number:
Dimensions (L x W x H):
Compatibility:
Weight:
Original Instructions
SJA420
430 x 370 x 100mm (17" x 14 ½" x 4")
SuperJaws SJA200, SJA300 and SJA100XL
1.73kg (3.81lb)

General Safety

General Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in a serious injury.
WARNING: This tool is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the tool by a person responsible for their
safety. Children must be supervised to ensure that they do not play with the
tool.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
c) Keep children and bystanders away while operating or using this tool.
Distractions can cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating or using this tool. Do not operate or use the tool while
you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating or using the tool may result in
serious personal injury. Work sensibly at all times with regular breaks if
necessary.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Remove any adjusting key or wrench before operating the tool. A
wrench or a key left attached to a rotating part of the tool may result in
personal injury.
d) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the tool in unexpected situations.
e) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
3) Tool use and care
IMPORTANT: Tools used outdoors may require more regular cleaning and
surface treatment to prevent corrosion, as well as replacement grease or oil on
moving parts to maintain them in good working condition.
a) Maintain tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the tool's
operation. If damaged, have the tool repaired before use. Many
accidents are caused by poorly maintained tools.
b) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
c) Use the tool's accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the
work to be performed. Use of the tool for operations different from those
intended could result in a hazardous situation.
4) Service
a) Have your tool serviced or repaired by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
tool is maintained.