Remote Control - TERMA MOA BLUE Manual De Instrucciones

Remote Control

The MOA Blue has a built-in and continu-
ously active Bluetooth Low Energy com-
munication module for remote control of
the heating element, using popular mobile
devices — smartphones and tablets, both
with Android (min 4.4) or IOS (min 6.0) op-
erating systems. The heating element is visi-
ble by other Bluetooth devices and appears
as MOA Blue Terma. You may need to en-
ter a default authorization code: 123456.
To start the pairing mode in MOA, press and
hold for approx. 5 sec. Pairing mode is in-
dicated by a flashing single, blue RGB LED.
Pairing mode, when activated, lasts 30
seconds.
The blue RGB LED will light up each time an
active exchange of information between the
heating element and an external control de-
vice, takes place.
TIMER mode
The control application allows the Timer to
be set for a period of 1 ... 240 minutes in
the full range of temperatures supported
by the heating element and any tempera-
ture measurement method — either inter-
nal radiator temperature or external room
temperature. Activation of the TIMER func-
tion is indicated by a red RGB LED.
Automatic heating program
schedule
The control application allows you to program
many different 7-day work schedules and to
upload any of the programmed schedules
to the memory of any Blue heating element
paired with the mobile device (see Tutorial
in the control application). When uploading
a schedule to the heating element's mem-
ory, a message confirming the action ap-
pears on the portable device screen, but
does not yet indicate a change in the heat-
ing element's operating mode.
15