Beper BT.700Y Manual De Instrucciones página 7

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Crepes maker Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
DESCRIPTION Fig.A
1. Power on indicator light (GREEN)
2.Temperature indicator light (RED)
3.Non-stick coking plate
USE INSTRUCTION
Before first use, remove the packing and stickers from the unit and clean the cooking plate with a wet cloth, and
wipe carefully.
Connect the appliance to the socket, the power on indicator light (1) and the temperature indicator light (2) lights
up. Select the desired temperature by turning the knob, the temperature indicator light (2) will switch off till the
cooking plate reach the selected temperature.
When cooking crepes, preheat the cooking plate, set the temperature then pour a small quantity of batter in the
middle of the cooking plate.
Spread the batter quickly in a circular motion using the wooden rack (6) until the desired diameter crepes. Leave
the crepe cook till the batter will look solid than it can be moved more easily on the cooking plate. Place a spatula
under the crepe and return it to cook on the other side. Cook until the crepe is lightly golden.
Remove the crepe from the cooking plate with the spatula. If the crepe is too cooked, set a lower temperature
before making crepes again. When cooking is complete, turn off the appliance by turning the knob (4) on "OFF"
position. Disconnect from the socket. Leave the appliance cool down, and clean before storing.
CLEANING AND CARE
Always clean the appliance after use. Make sure the unit is disconnected from the socket.
Wait until the unit is completely cool down.
Clean the cooking plate with a wet cloth.
If food residue on the cooking plate, use this method: put some oil on it. Leave it for about 5 minutes, and remove
with a wet soft, and wipe carefully. Wipe the appliance before storing it.
4.Switch on/off and temperature selector knob
6.Unit
7.Wooden T stick
7
EN
Tabla de contenido
loading

Tabla de contenido