Environmental Protection - Master WiCloud Serie Manual De Usuario

 Connect the power supply cable of the chain actuator and select the stroke.
 Recess mount the actuator in the hole made previously, taking particular care not to ruin
the cables, moving it first towards one side and then centering it on the fastening holes.
 Perform a final test and verify that the device operates correctly on the window frame.
 Check that once the product is installed, the gripping hook of the sliding accessory is
completely hooked when the actuator is closed.

ENVIRONMENTAL PROTECTION

All the materials used for construction of the machine are recyclable.
It is recommended that the machine itself, the accessories, packing materials,
etc. be sent to a recycling center as required by current laws on waste
recycling.
Components of the device:
Iron
REFERENCE TO THE PRINCIPLES OF THE WARRANTY CERTIFICATE
The manufacturer guarantees good operation of the machine. The manufacturer
also undertakes to replace pieces that are defective due to poor quality of the
material or manufacturing defects as set forth in article 1490 of the Italian Civil
Code.
The warranty covers the products or individual parts for a period of 2 years from
the date of purchase. The warranty is valid if the buyer is able to exhibit proof of
purchase and has met the agreed payment terms and conditions.
The guarantee of good operation of the devices granted by the manufacturer is
understood in the sense that the manufacturer undertakes to repair or replace,
free of charge and in the shortest time possible, those parts that have failed

during the warranty period. The buyer cannot claim right to any compensation for
any direct or indirect damages or other expenses. Any repair attempts made by
personnel who have not been authorized by the manufacturer void the warranty.
Fragile parts or parts subject to natural wear, corrosive agents or procedures,
excessive loads (even if only temporary), etc., are not covered by the warranty.
The manufacturer will not be held liable for any damage caused by incorrect
assembly, handling or insertion, excessive stress or inexperienced use.
The repairs under warranty are always understood to be "ex-factory". The buyer
must always pay the respective shipping expenses (to and from the factory).
The total or partial removing of the sticker label (with the identification code of the
article) invalidates the warranty.
Before the intervention of an authorized technician, the buyer has to prove the
presence of the original power cable, that must be no shorter than 30 cm.
MASTER S.r.l. – I417M - 06/03/2019
Master Srl may not be held liable in any way whatsoever for any inaccuracies due to printing or data transcription errors in this document
C
ONCLUSIONS
Aluminum Copper Zinc Silicon Plastic
Pagina 17