Tabla de contenido
Do not use spanner SW 10 with longer handle than supplied with machine to prevent excessive torque and possible
stripping of threads. For your own safety replace lock bars or bolts with damaged thread at once.
9.0 Belt Tension
After the first 5 hrs of operation check belt tension. Take
off cap nut holding the drive belt cover (215). Check
tension by pushing against belt, play should be approx.
15 – 20 mm or 5/8-2/4 inch.
10.0 Care and Maintenance
Regularly clean the thicknesser drive gear from dust with
brush or compressed air. Lubricate all bearing points
and chains regularly with a few drops of motor oil.
Keep flat belt free of oil and grease.
9
EN
Capítulos
Tabla de contenido
