After Use; Maintenance And Cleaning - ECG VP 3101 S Manual De Instrucciones

Issues
Do not use an appliance showing any signs of damage. Damaged power cords must be replaced by a qualifi ed
authorized service centre. Only this way can you prevent safety risks.
See the troubleshooting guide if your vacuum cleaner does not operate correctly. Refer to an authorized
service centre if you are not able to resolve an issue yourself.
1
GB
5

After use

Turn off the vacuum cleaner and unplug the power cord from the outlet. Before you add any accessories or
before cleaning the appliance, always turn the vacuum cleaner off and unplug it from the outlet.
Full dust bag indicator
The vacuum cleaner is equipped with an indicator 2, which changes to red colour, if the dust bag is full or if
the suction hoses are clogged. If the full dust bag indicator is red even after inserting a new bag, switch off
the vacuum cleaner, unplug the power cord and check the hose or tube for jammed objects. If the indicator
remains red, refer to an authorized service centre or your dealer. To prevent overheating and possible damage
to the vacuum cleaner, check the following:
• All the connections between hose, telescopic
tube and the fl oor brush
• Opening for connecting the hose
• Brush throughput

MAINTENANCE AND CLEANING

Attention:
Always unplug the power cord from the outlet before any maintenance and cleaning.
1. Changing the dust bag: When the colour of the dust bag indicator 2 changes to red, it is time to change
or empty the dust bag.
• Press the lock in front to open the front cover (Fig. 8).
• Remove the holder with the bag and remove the full bag from the holder (Fig. 9).
2. Cleaning of the exhaust fi lter: Open and remove the exhaust fi lter cover. Wash the fi lter with warm water
and dry thoroughly before using it again. If the fi lter is damaged, replace it (Fig. 10).
30
2
6
•
•
•
3
7
Exhaust fi lter
Motor fi lter
Dust bag
4