Demolition And Dismantling - Tecno-gaz B-MAX 4700S3 Manual Del Usuario

ENGLISH
It must be transported following the rules for the transportation of fragile goods.
The original packaging should be kept for the duration of the guarantee period, since
only in this container it is possible to avoid damages during transport.
Place the unit on a horizontal surface, away from heat sources.
Connection and putting into service:
The electrical connection must be made in accordance with current technical
regulations.
Make sure the measured mains voltage value corresponds to that written on the
machine's identification plate.
CHARGE THE LAMP WITH BATTERY CONNECTED FOR AT LEAST SIX CONTINUOUS
HOURS.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD LIMIT THE PERFORMANCE OF THE
LAMP.
DEMOLITION AND DISMANTLING
Directive on waste from electrical and electronic equipment
(WEEE)
Pursuant to DIRECTIVE 2002/96/EC, this symbol shows that
the product must not be disposed of as urban waste at the
end of its operating life.
The product must be taken to centers specialized in
separate collection of electric and electronic equipment or
to a dealer, when a similar product is purchased.
The machine holder shall be responsible for bringing it to
collection centers.
For further information about collection systems, address
the local waste disposal service.
Correct disposal of the equipment, which is no longer used,
prevents negative consequences for the environment and
human health.
Abuses will be prosecuted by law.
10