Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. Pour cold water into the tray before you connect the appliance, and verify it does not run out while in use. Doing
that you will avoid the smoke produced when falling the grease over the tray.
8. Plug in the appliance to the mains. Wait a few seconds for the electrical element to heat. Then put the food on
the grille.
Troubleshooting
The heating element is fitted with a safety switch. This prevents the heating element being operated outside the grill
tray. If the heating does not switch on, please check the mains connection and whether the heating element is fitted
correctly into the grill tray.
Maintenance and Cleaning
Before you proceed to cleaning make sure the appliance is cold and that it is not connected to the mains.
Remember you must not immerse the heating element, the handle and the cable cord in water.
Remove the heating element.
Use a dampened cloth to clean the heating element.
Do not use to clean abrasive or chemical products, metallic scourers, and such may deteriorate the surfaces.
The grille and the tray can be cleaned with soap and water.
Technical data:
Model: ........................................ GR-200.006A
Power supply: .............................. 230V~, 50 Hz / Protection class I
Power consumption: ................... 2000W
Instructions for use
English
3
Tabla de contenido
