Accessories; G.plastic Components; Operating Instructions; Caster Wheels - Zippie JCM Hi-Lo Base Manual De Instrucciones

JCM HI - LO BA SE
F. ACCESSORIES
1. See your health care professional and have them adjust seat-
ing components and accessories as your child grows.
2. Unauthorized modifications or use of parts not supplied or
approved by Sunrise Medical may change the product's
structure. This will void any warranty and may cause a safe-
ty hazard.
3. The device is not designed for use with accessories like ven-
tilators, O2 bottles or IV poles. Contact Sunrise Medical for
information on devices that work with these accessories.
Use of any device not approved by Sunrise Medical could
result in injury to the occupant or damage to the unit.

OPERATING INSTRUCTIONS

The JCM Hi-Lo Base is a lightweight alternative base that can be used with
the Voyage positioning shell. It is designed for the home or an institutional
environment. The JCM Hi-Lo Base is height adjustable from approximately a
10-inch to 29-inch floor to seat height. This capability allows the occupant to
be comfortable at a variety of heights for indoor activities. The unit also pro-
vides a compact base for therapeutic evaluations. At the lowest position it is
compact for easy storage. The JCM Hi-Lo Base uses a gas spring to assist
with the height adjustment function. Please read all user instructions prior to
attempting to use this base.
A. CASTER WHEELS
Always lock the caster wheels before attempting any adjustment on the Hi-Lo
base, or parking on a slope or incline.
1. Locking the Caster Wheels
a. Place the tip of your foot on top of the first caster lock lever(A) press
down gently until you feel the lock engage.
b. Repeat this process for all four caster wheels until the base is restrict-
ed from movement.
2. Unlocking the Caster Wheels
a. Using your foot, lift up on the locking lever (A). This will release the
caster wheel lock.
b. After releasing all four of the locks the base should move freely. If
there is any resistance to free movement, make sure that the locks are
completely disengaged.
MK-100068 Rev. A
WARNING
1
2
G. PLASTIC COMPONENTS
1. Do not attempt to glue or bond any broken plastic compo-
nents. Some adhesives or thread locking compounds may be
chemically incompatible with the plastic material and could
weaken it.
2. Unauthorized use of any such chemicals (for example, sol-
vent or acrylate based adhesives) may void the warranty.
3. Replace any broken components with new parts. Failure to
follow this warning may result in damage to the chair or
injury to the rider or others.
4
V. OPERATING INSTRUCTIONS
WARNING
1
2