HoW to uSe rooM MoDe operation
AIR QUALITY
BED
SMALL
DINING
LIVING
DUST
ODOR
ROOM
SMOKE
Room Mode Lamp
1 Press the Room Mode button in operation to set at your desirable mode.
• The Room Mode will flash to light up after a period of time, and the Room
Mode is set.
• To select a different mode, start the procedure from
• Once press the button, the mode will switch.
*It is not necessary to press and hold the button.
• When the outlet is inserted for the initial period of time, this mode will start
from "Living Room Mode". When the unit restarts, the previous setting is
memorized and start the mode in operation.
• The operation does not start even if pressing the Room Mode button while
in shutdown.
Press this button to activate a specially programmed pollen removal function.
The light
on the display will switch on. Press the
function off.
Press this button to activate a specially programmed smoke removal function.
The light
on the display will switch on. Press the
function off.
attention!
!
The air quality is indicated on the display during air purification.
The higher the level of contamination in the air, the more lights will turn red.
There are separate indicators for the dust (
SMOKE
4
POLLEN
2
1
FILTER
(H)
again.
1
button to switch this
button to switch this
) and odour (
) status.
1
4
9