Technical Specifications - ECD XMS 1111 U Manual De Instrucciones

Symptom
The remote
controller does not
work
Noise or distorted
sound from the FM
radio

TECHNICAL SPECIFICATIONS

Tuner
GB
CD
INPUTS
Ampli er
Remote control
Main unit dimensions (w × h × d)
Net weight
Gross weight
Power
Standby power input
Operating conditions
66
66
XMS 1111 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 66
Cause
• The batteries are empty.
• The remote controller is not directed at the remote
controller sensor.
• The remote controller is outside of its operating range.
• The station is not properly tuned in.
• The FM antenna is not fully extended.
FM band range
Number of FM station pre-sets
Frequency characteristic
S/N ratio ( lter A)
Dynamic range
Distortion and noise
Supported CD les
USB
Supported USB les
Maximum size of USB device
AUX-IN
Output Power / Total music maximum power
Frequency characteristic
Battery
Temperature
Relative humidity
Correction
• Replace old batteries with new ones.
• Make sure the remote controller is directed at the remote
controller sensor.
• Make sure the remote controller is close enough to the
device.
• Tune the FM station correctly.
• Extend the FM antenna fully.
87.5 ~ 108 MHz
20
10Hz ~ 20kHz
60 dB
85 dB
15 % (Max. Power)
CD / CD-R / CD-RW / MP3 CD
USB 2.0 or USB1.1, 500 mA
FAT12, FAT16, FAT32
64 GB
3.5 mm jack
2× 15 W / 2× 30 W
10 Hz ~ 20 kHz
3 V CR2025
548 × 247 × 114
3.5 kg
4.0 kg
AC ~100–240 V, 50/60 Hz
0.9 V
0~50 °C
30~95 %
17.07.2016 16:00:44