Using The System - ECD XMS 1111 U Manual De Instrucciones

Note regarding magnetically unshielded speakers
This appliance is not magnetically shielded and can cause color shift on the screen of some TV sets or monitors.
In this case, the device should be placed farther away from the TV to prevent color distortion.

USING THE SYSTEM

Turning the device on and o
Press the button POWER 1 in the standby mode on the device or on the remote control. The LCD display
1.
shows icon of the last selected input source.
If you want to turn the device o , press again the button POWER 1 on the device or on the remote
2.
control. The LCD display darkens and a clock appears.
Note: If the device is not used for 20 minutes it switches automatically to standby mode.
Setting the clock (only from the remote control)
After connecting the power adapter, the LCD display shows ashing "12:00".
When the device is in standby mode, press the CLOCK SET button on the remote control. The time format
1.
12HOUR appears and the number "12" will continue to ash.
2. Using buttons
begin to ash.
3. Using buttons
Press SELECT to con rm the set hour. The minutes start to ash.
4.
5. Using buttons
6. Press again SELECT to con rm the set time. The clock is now set.
Note: In the event of a power failure the clock of the device and the preset radio stations must be set again. The
display will ash "12:00", indicating a power outage. Set the clock by repeating the procedure described above.
Finding time (only the remote control)
The clock is shown in the standby mode on the display of the device. If you want to nd out what time is it
when the device is on, press CLOCK SET on the remote control. The current time appears for 5 seconds and
then the screen returns to the original display.
Set the alarm clock (only on remote control)
The device allows to set the alarm using CD playback, radio or buzzer.
When the device is in the standby mode, press ALARM1 or ALARM2. The display shows alarm time AM
1.
12:00. Press again and hold ALARM, the alarm hour starts ashing.
2. Using buttons
to ash.
3. Using button
the alarm.
4. Using buttons
level starts ashing.
5. Using buttons
Notes
• The device has two independent alarm clocks available, which you can set using buttons ALARM1 or
ALARM2.
• If you select alarm using a CD and at the time of alarm there is no CD inserted, the device will use buzzer
as the alarm.
• If you select alarm using radio, the device tunes the last received station.
XMS 1111 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 61
/
select between 12h and 24h format and con rm by pressing SELECT. The hours
/
set the hour. Hold for faster change.
/
set minutes. Hold for faster change.
/
set the desired hour and con rm by pressing the button SELECT. The minutes start
/
set minutes and con rm by pressing SELECT. The display will show the source of
/
select between CD, radio or buzzer and con rm by pressing SELECT. The volume
/
set the alarm volume and press SELECT to end the alarm clock setting.
GB
61
61
17.07.2016 16:00:44