Connecting The Hob To The Mains Power Supply - Viesta C2Z Manual De Instrucciones

KEN001AKC

Connecting the hob to the mains power supply

The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker.
The method of connection is shown below.
Viesta C3Z, Viesta C4Z, Viesta C5Z
220V~ / 32A
L1 L2 L3 N
L
ACHTUNG
• If the cable is damaged or to be replaced, the operation must be carried out
the by after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm between
contacts.
• The installer must ensure that the correct electrical connection has been made
and that it is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians
only.
[English]
2 x 220V~ / 16A
L1 L2 L3 N
L L
[ 35 ]
21.08.2017 • v09
Viesta C2Z
220V~ / 16A
L1 L2 L3 N
L