Using Your Ceramic Hob; Using The Touch Controls For Viesta C2Z, Viesta C3Z, Viesta C4Z - Viesta C2Z Manual De Instrucciones

KEN001AKC

Using your ceramic hob

for Viesta C2Z, Viesta C3Z and Viesta C4Z
To start cooking
1. Touch the ON/OFF control, the buzzer beeps once,
all the indicators light up for 1 second then go out,
indicating that the ceramic hob has entered the state
of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control
4. Select a heat setting by touching the
control.
• If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.
[English]
or
[ 14 ]
21.08.2017 • v09