Usb Playback - ECG CDR 1000 U Manual De Instrucciones

When you are listening to the radio, you can press repeatedly P-DN or P-UP to call up the required preset
5.
station.
CD playback
You can play original CD and CD-R/RW discs in the device.
1. Press the power button to turn the device on.
2. Push on the marked area of the door to open the door of the CD compartment.
3. Insert the disc with the label up.
4. Close the door of the CD compartment.
Press repeatedly FUNCTION to select the CD mode (display shows CD).
5.
6. When the door to the CD compartment is closed and the disc is in, the display shows the total number of
tracks and then the playback starts beginning with the first track.
7. If there is no disc in the device, the display shows "
Press PLAY/PAUSE to pause the playback, press again to resume playback.
8.
Press BACK or NEXT to go to the previous or next track.
9.
10. Hold the button BACK or NEXT to move faster back or forward within the track.
11. If the disc contains MP3 tracks in various folders, you can select the required folder by using the buttons
P-DN or P-UP.
12. Press STOP to stop the playback of the disc.
Repeat Mode
• Repeating one track: During CD playback press once the button REPEAT. The display shows an indicator
of repeating one track "
Repeating all tracks: During CD playback press twice the button REPEAT. The display shows indicator of
•
repeating all tracks "
• Cancelling the repeat function: Press repeatedly the button REPEAT until the repeat indicator disappears.
Programming
When the CD playback is stopped, press once the button PROGRAM. The display shows the indicator
1.
"PROGRAM" and the number of the first program position "
Using the buttons BACK or NEXT select the required track and press PROGRAM to store it in the memory.
2.
3. When repeating the previous step you can create a program of up to 20 tracks long.
Press PLAY/PAUSE to start program playback.
4.
Cancelling the program: While the playback is stopped, press the button STOP or open the door of the
•
CD compartment. Cancelling the program is indicated when the program indicator goes off.

USB playback

1. Insert the USB storage device in the USB port.
Press repeatedly FUNCTION to select the USB mode (display shows USB).
2.
3. After loading the content the playback starts from the first track.
4. Using PLAY/PAUSE you can pause the playback and start again.
5. You can use the same buttons to control the playback as in the CD mode.
Note: Due to the many different formats available on the market we cannot guarantee 100% compatibility
with all USB storage devices.
External input AUX IN
1. Attach the audio cable to the AUX IN connector and connect the other end to the music source, e.g. to the
MP3 player.
Press repeatedly the button FUNCTION to select the AUX mode.
2.
3. Use the volume buttons to set the volume of the device to a suitable level.
4. Use the controls of the connected device to control the playback.
". The current track will play repeatedly.
ALL". The whole disc will play repeatedly.
" and the device stops.
".
GB
45