Remote Controller - ECG CDR 1000 U Manual De Instrucciones

• The power cord should be led so as to avoid stepping on the cord or its excessive straining or pinching. Pay
special attention to places where then cord exits from the appliance and close to the plug. If the device is
not used for long periods, unplug the power cord. Unplug the power supply also during a thunderstorm
to prevent damage by lightning.
• The electrical outlet has to be constantly accessible.
• Do not overload electrical outlets by plugging in too many appliances.
• Protect the device against infiltration of liquids or foreign objects and do not insert any object into the
ventilation openings, with potentially hazardous contact with voltage inside the device.
• Do not open the device box. There are no elements inside that can be configured by the user. Have
a qualified service technician perform repairs on the device.
• Do not expose batteries to excessive temperatures, e.g. direct sunlight, fire etc.
• Replace batteries only with batteries of the same type and with correct polarity. Otherwise there is a risk
the system may explode.
• In the following cases, unplug the device and contact a qualified service:
• The power cord was damaged
• The device was infiltrated by a foreign object or liquid, or it was exposed to rain or water.
• The appliance does not operate normally in accordance with the manual. Set only the elements
GB
described in the operating manual.
• The device has significant functionality changes, indicating a need for service.
• Do not expose the device to heat sources such as radiators, heating or other heat-producing appliances
such as amplifiers.
• Changes or modifications not expressly approved by the responsible authority can lead to loss of
authorization to use the device.
• Excessive sound pressure from earphones can cause hearing damage.
• The type label is located on the bottom side of the device.
DESCRIPTION
Appliance
Left speaker
1.
2. Volume button
On/Off switch
3.
LCD display
4.
USB connector
5.
6. CD tray door
Function selection
7.
P-DN button
8.
9. P-UP button
10. Right speaker
11. Headphones jack
12. Standby indicator

Remote controller

1. POWER button
2. TIME button
INTRO button
3.
MUTE button
4.
5. RANDOM button
6. Button NEXT
REPEAT button
7.
42
13. BACK button
14. NEXT button
15. STOP button
16. PLAY/PAUSE button
17. REPEAT button
18. TIME/PROGRAM button
19. AUX/IN jack
20. FM antenna
21. AC power supply plug
22. Battery compartment cover
23. IR sensor
8. PROGRAM button
9. Button P-UP
10. FUN. button
11. Button P-DN
12. EQ button
13. PLAY/PAUSE button
14. Button BACK
15. BBS button
16. STOP button
17. Numerical buttons
18. VOL- button
19. VOL+ button