Beper RI.419 Manual De Instrucciones página 12

Electric heating pad Use instructions
DESCRIPTION OF PARTS (Fig. 1)
A. Soft polar fleece outer cover, can be machine washed at 40 °C max.
B. Inner, flexible PVC heating element, DO NOT WASH. Permanently connected to the
control, it must always be
removed before washing the fleece cover.
C. Control, to be connected to the mains (230V/50Hz) with a 4 position switch to select
the temperature:
0 = OFF
1 = low temperature (minimum)
2 = medium temperature
3 = high temperature (maximum)
HOW TO USE
It is a practical, lightweight heated PAD. The outer cover is made of soft polar fleece and
can easily be removed for washing, also in a washing machine at temperatures up to 40
°C.
Never place the control on the pad or cover it when in use, as it can overheat.
Please observe following instructions for use:
1. Fully open the pad, avoiding folds that could damage the fabric.
2. Make sure the power socket is close enough to the position where the appliance is
used, so the control can be easily plugged in and used without the risk of anyone tripping
over the power cord.
3. Check the control is switched to 0, then plug the power cord of the control into the so-
cket (230V/50Hz).
4. Make sure that the cord is not twisted.
5. Never use non-original controls. Use the control supplied. Do NOT use without the
control.
HOW TO USE THE CONTROL (Fig.2)
Turn the control from position 0 to one of the three possible positions to switch the heated
pad on:
1 = low temperature (minimum)
2 = medium temperature
3 = high temperature (maximum).
Turn the switch to position 3 to heat the pad quickly: the pad will reach a comfortable tem-
perature in just a few minutes. Then turn the switch to the desired temperature.
Turn the switch back to 0 to turn the pad off.
12