Panasonic PAW-DHWM200ZC Instrucciones De Instalación página 4

TECHNICAL CHARACTERISTICS THE HOT WATER TANK WITH
HEATING PUMP
Model
Volume
Rated pressure
Weight / Filled with water
Anti-corrosion protection of tank
HE heated surface - lower
HE heated surface - upper
HE volume - lower
HE volume - upper
Heating power of HE - lower
Heating power of HE - upper
Temperature of the heating medium in HE
Insulation thickness
Degree of protection
Max connected load
Voltage
Adjusted water temperature
Legionella control programme
Operation zone - air
Max volumetric flow rate of air
Max acceptable pressure drop in the pipeline
(volumetric flow rate of air 480 m
Refrigerating agent
Quantity of coolant
*Heating time A7 / W10-55
*Energy consumption during heating A7 / W10-55 [kWh]
Type of measured cycle of emissions
*Energy consumption in the selected cycle
of emissions A7/W10-55
*COP in the selected cycle of emissions A7 / W10-55
DHW
Max quantity of usable water (min 40 °C)
Sound power / Sound pressure at 1m
HE - Heat exchanger
1) Heating of domestic water from 10 °C to 45 °C with the inlet temperature of the heating medium of 80 °C
and flowrate of 3000 l/h.
(*) Heating of water to 55 °C at inlet air temperature of 7 °C, 89% humidity and inlet temperature of water of
10 °C; in accordance with the EN16147 standard.
4
[MPa]
[kg]
[m
[m
1)
[kW]
1)
[kW]
[°C]
[mm]
[W]
[°C]
[°C]
[°C]
3
[m /h]
3
/h) [Pa]
[g]
[h:min]
[kWh]
[dB(A)]
PAW-
DHWM200ZC DHWM300ZC
[l] 200
up to 1,0 (10)
120 / 320 149 / 434
Enameled / MG Anode
2
] 1,05
2
] -
[l] 6,6
[l] -
25,8
-
5 to 85
230 V / 50 Hz
7 to 35
R 134a
7:22
3,25
L
4,9
2,6
[l] 252,08 345,76
56,7 / 44 56,7 / 44
PAW- PAW-
DHWM300ZE
285 280
166 / 446
1,60 1,60
- 1,09
10 10
- 6,8
42,7 42,7
- 26,9
57
IP 21
620
55
65
480
90
780
11:10 11:10
4,76 4,76
XL XL
7,26 7,26
2,8 2,8
345,76
56,7 / 44