Setting Screen - Selecta 2000368 Manual De Instrucciones

INSTRUCTION MANUAL
Time/Date
PID/Autotuning
Comunication
Reject change
Validate change
J
.P. SELECTA s.a.u.
CODE 80294 REV 0

7.2 Setting screen

Icons meaning:
½
7.2.1 Set time and date
Press on the time/date icon. Press successively on the box to select the day,
month, year, minute & second adjustment.
Adjust by pressing on the icons Increase and Decrease.
7.2.2 Set parameters of temperature control and
«Autotuning»
For an optimal use of the furnace, P, I, D parameters of temperature control
should be the appropriate value.
With a value of the appropriate P, I, D parameters, the furnace will reach
the temperature in the shortest possible time and without exceeding the set
temperature. However, those values can be quite different at high and low
temperatures.
The furnace comes with the following values: P=10; I=100; D=25 which are
appropriate for most jobs.
These values can be modifi ed, but it's advisable to perform an «Autotuning»
when you need a better accuracy.
The «Autotuning» automatically adjusts the optimal parameters for a given
temperature and a load.
Press on the PID/Autotuning icon. Press successively on the box to select the
P, I, D values adjustment and modify the value by pressing on the Increase
and Decrease icons.
Attention: It is not recommended to change these parameters. Use the
«Autotuning» option to automatically adjust these values.
Press on the PID/Autotuning icon.
Select the «Autotuning» temperature with:
(for example, the temperature most used)
Start «Autotuning» by pressing on the icon:
If for some reason you want to stop, press on:
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
Nov/2014 (It can be modifi ed without notice)
á á
ºC/ºF
Tel 34 937 700 877 Fax 34 937 702 362
Page: 16
Alarms and temp. offset
Temperature units
Language (Spanish, English,
French)
Up/Down