Travel Lock; Operation - Carrera 622 Manual De Instrucciones

Charging
1. Connect the USB plug 11 to the USB female connector 12 and the
5V plug 14 to the appliance.
2. Connect the mains adapter to an easily accessible wall socket.
3. Observe the indicator lights on the hair clipper (see table).
WARNING! Always observe the voltage and power (mA) data
stated on the type plate of the mains adapter. Never use exter-
nal power sources strongly deviating from these data.
Symbol
% display

06. TRAVEL LOCK

It is easy to prevent the hair clipper from being accidentally switched on,
e.g. when travelling.
NOTE: The travel lock function will be deactivated automatically when
the charging process starts.
30 GB
Meaning
Battery operation
Battery capacity low –
recharging
Charging or mains operation
Fully charged at the mains
Travel lock is active
Activating the travel lock
1. Press and hold the on/off switch 4 for more than 5 seconds. The
switch of the hair clipper is locked and the appliance switches off.
A padlock symbol flashes on the LCD display.
Check whether the travel lock is activated by briefly pressing the
on/off switch 4 (for less than 5 seconds). If the travel lock is active,
the padlock symbol is shown on the display.
2. The on/off switch is temporarily without function; accidental
activation of the appliance and discharging of the batteries are
prevented.
Deactivating the travel lock
1. Press and hold the on/off switch 4 for more than 5 seconds; the
travel lock is deactivated and the hair clipper switched on.
2. The travel lock will also be deactivated by connecting the hair clip-
per to the mains.

07. OPERATION

Regardless of the state of charge of the batteries, mains operation of
the appliance is always possible using the provided mains adapter
only.
1. For mains operation connect the USB plug 11 to the USB female
connector 12 and the 5V plug 14 to the appliance.
2. Connect the mains adapter to an easily accessible wall socket.
3. Use the on/off switch 4 to switch on the appliance.
4. Press the on/off switch 4 to switch off the appliance.
Using the variable attachment comb
WARNING! Switch off the appliance before attaching the vari-
able attachment comb.
To attach the variable attachment comb, carefully push the locking
● ●
mechanism of the variable attachment comb 10 into the central
guide groove of the appliance; at the same time, press the cutting
length adjustment button 20 on the back of the comb attachment
and set the desired cutting length. The selected cutting length is
shown on the display (see fig. B) 19
.
GB 31